Portfolio
Zirconium
What we accept
The categories below, subject to chemistry, form and condition.
- Zr VQvacuum quality
- Zircaloy types
- Zr-Nb alloys
- Zr sponge and crystal bar
- Master alloys
- Off-spec Zr scrap with contamination
Forms
- Solids
- Turnings and swarf
- Runners, risers and gates
- Grindings
- Fines and microgranules
- AM and 3D powders
- Dusts
- Filter cake and process residues
Contact IMS
Send the grade or analysis, the form and the quantity, with any analysis or photographs. Off-spec and mixed lots are welcome — say what you know and we will assess the available route.
For buying, selling and other material enquiries, contact us at info@ims-metals.com.
Grade reference
6 grades, with nominal composition as published.
Reference values for identifying material, not a purchasing or supply specification — see the note under each table.
Chemical composition
6 grades · percentage by weight
| Grade | Ti | Al | V | Sn | Mn | Zr | Mo | Cu | Cr | Si | Others |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Zr 10 (C.P.) | – | – | – | – | – | 100 | – | – | – | – | – |
| Zr Nb | – | – | – | – | – | BAL | – | – | – | – | 2.5 Nb |
| Zr 20 | – | – | – | 1.5 | – | BAL | – | – | 0.1 | – | 0.05 Ni |
| Zr 30 | – | – | – | – | – | BAL | 0.5 | 0.5 | – | – | – |
| Zr 40 | – | – | – | 1.5 | – | BAL | – | – | 0.1 | – | 0.12 Fe |
| Zr 42 | – | – | – | – | – | BAL | 1.5 | 1.1 | – | – | – |
Select grades to compare them side by side, or save them to a shortlist.
* indicates maximum. Chemical compositions are provided as typical or nominal reference values for material identification only. They do not constitute a purchasing or supply specification. Applicable standards, chemistry ranges and customer requirements must be confirmed before any transaction.
Scroll the table sideways to see all elements, or switch to cards above.
Have zirconium to place?
The grade or analysis, the form and the quantity are enough to start. We will assess the available route.
For buying, selling and other material enquiries, contact us at info@ims-metals.com.