Portfolio
High-Nickel Alloys
What we accept
Segregated grades, mixed high-nickel revert, off-spec and contaminated lots, subject to chemistry, form and condition.
Forms
- Solids
- Turnings and swarf
- Runners, risers and gates
- Grindings
- Fines and microgranules
- AM and 3D powders
- Dusts
- Filter cake and process residues
Powders, oxides & intermediates
- Ni(OH)₂Nickel hydroxide
- Nickel powder
- Alloy metal powder
- Sinter powder
Contact IMS
Send the grade or analysis, the form and the quantity, with any analysis or photographs. Off-spec and mixed lots are welcome — say what you know and we will assess the available route.
For buying, selling and other material enquiries, contact us at info@ims-metals.com.
Grade reference
52 grades, with nominal composition as published.
Reference values for identifying material, not a purchasing or supply specification — see the note under each table.
Chemical composition
52 grades · percentage by weight
| Grade | Ni | Cr | Co | Mo | W | Fe | Al | Ti | Cu | Nb | Others |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Hastelloy A | 57 | 1.0* | – | 21 | – | 19 | – | – | – | – | – |
| Hastelloy B | 62 | 1.0* | 2.5* | 28 | – | 5.5 | – | – | – | – | 0.4 V |
| Hastelloy B2 | 66 | 1.0* | 0.75* | 28 | – | 2.0* | 0.4* | – | – | – | – |
| Hastelloy C276 | 56 | 16 | 2.5* | 17 | 4 | 5.5 | 0.4* | – | – | – | 0.35* V |
| Hastelloy C22 | 54 | 21 | 2.5* | 14 | 3 | 5.0* | 0.4* | – | – | – | 0.35* V |
| Hastelloy C4 | 54 | 16 | 1.25* | 16 | – | 2.0* | 0.4* | 0.5* | – | – | – |
| Hastelloy D | 85 | 1.0* | – | – | – | 1.0* | – | – | 4.0* | – | 9 Si |
| Hastelloy F | 45 | 22 | 2.5* | 6 | 1.0* | 18 | – | – | – | 2 | – |
| Hastelloy G | 44 | 22 | – | 6.5 | 1.0* | 20 | – | – | 2 | 2 | – |
| Hastelloy N | 72 | 7 | 0.2 | 16.5 | 0.5 | 5.0* | 0.25 | 0.25 | – | – | 0.01 B |
| Hastelloy R | 66 | 15.5 | 1.5* | 5 | – | 7.0* | 2.2 | 2.5 | – | – | – |
| Hastelloy S | 68 | 15.5 | – | 14.5 | – | 1 | – | – | – | – | 0.5 Mn |
| Hastelloy W | 63 | 5 | 2.5* | 24.5 | – | 5.5 | – | – | – | – | 0.6 V |
| Hastelloy X | 47 | 22 | 1.5 | 9 | 0.6 | 18.5 | – | – | – | – | – |
| Langalloy 4R | 65 | – | – | 30 | – | 5 | – | – | – | – | – |
| Langalloy 5R | 57 | 16 | – | 17 | 5 | 5 | – | – | – | – | – |
| Langalloy 7R | 58 | 23 | – | 6 | 2 | 5 | – | – | 6 | – | – |
| PE 7 | 37 | 18 | 2 | 5 | – | 35 | 1.2 | 1.2 | – | – | – |
| PE 10 | 64 | 20 | – | 6 | 2.5 | – | – | – | – | 6.5 | – |
| PE 11 | 38 | 18 | – | 5.2 | – | 34 | 0.8 | 2.3 | – | – | – |
| PE 13 | 48 | 22 | 1.5 | 9 | 0.6 | 18.5 | – | – | – | – | – |
| PE 16 | 44 | 16.5 | – | 3.5 | – | 33 | 1.2 | 1.2 | – | – | – |
| Illium G | 57 | 22.5 | – | 6.4 | – | 6.5 | – | – | 6.5 | – | – |
| Illium R | 64 | 22 | – | 5 | – | 6 | – | – | 2.5 | – | – |
| C130 | 62 | 22 | – | 10 | – | 0.5 | 1 | 2.7 | – | – | – |
| Inconel 600 | 75.5 | 15.5 | – | – | – | 7 | – | – | – | – | – |
| Inconel 601 | 60.5 | 23 | – | – | – | 14.1 | 1.35 | – | – | – | – |
| Inconel 625 | 61 | 21.5 | – | 9 | – | 3 | – | – | – | 3 | – |
| Inconel 690 | 61 | 29 | – | – | – | 9 | – | – | – | – | – |
| Inconel 702 | 79 | 15.6 | – | – | – | 0.4 | 3.4 | 0.7 | – | – | – |
| Inconel 706 | 41.5 | 16 | 1 | – | – | 36 | – | 1.75 | – | 2.9 | – |
| Inconel 713C | 72 | 13.4 | – | 4.5 | – | 1.5* | 6.2 | 1.0* | – | 2.3 | – |
| Inconel 718 | 53 | 18.5 | – | 3 | – | 18 | – | 0.8 | – | 5 | – |
| Inconel W(722) | 75 | 15 | – | – | – | 6.5 | 0.6 | 2.4 | – | – | – |
| Inconel X(X750) | 73 | 15 | 1 | – | – | 7 | 0.9 | 2.5 | – | 0.9 | – |
| GMR 235 | 63 | 15.5 | – | 5.2 | – | 10 | 3.7 | 2 | – | – | 0.06 B |
| IN-102 | 67 | 15 | – | 2.9 | 3 | 7 | 0.5 | – | – | 2.9 | – |
| IN-162 | 74 | 10 | – | 4 | 2 | 0.5 | 6.5 | 1 | – | 1 | 2.0 Ta |
| IN-657 | 49 | 48 | – | – | – | – | – | – | – | 1.5 | – |
| Incoloy 800 | 32 | 20 | – | – | – | 47 | – | – | – | – | – |
| Incoloy 825 | 40 | 21 | – | 3 | – | 32 | – | 1 | 2 | – | – |
| Incoloy 901 | 42 | 12.5 | 1.0* | 5.7 | – | 35 | 0.35* | 2.9 | – | – | – |
| Incoloy DS | 37 | 18 | – | – | – | 42 | – | – | – | – | 2.3 Si |
| R55 | 52 | 23 | – | 4 | 2 | 8 | – | – | 6 | – | 4.0 Si |
| AISI 310(HK) | 20 | 25 | – | – | – | BAL | – | – | – | – | 2 Mn |
| AISI 330(HT) | 35 | 15 | – | – | – | BAL | – | – | – | – | 2.5 Si |
| Nimonic 75 | 77 | 20 | – | – | – | 5.0* | 0.15 | 0.4 | – | – | – |
| Nimonic 80 | 74 | 20 | 2.0* | – | – | 1.5* | 1.3 | 2.2 | – | – | – |
| Nimonic 81 | 65 | 30 | – | – | – | 1.0* | 1 | 1.75 | – | – | – |
| Nimonic 86 | 64.5 | 25 | – | 10 | – | – | – | – | – | – | 0.15 Mn |
| Nimonic 942 | 48 | 12.5 | 1.0* | 5.5 | – | 25 | 4 | 3.7 | – | – | 0.015 B |
| PD16 (PD21) | 71 | 6 | 1.0* | 2 | 11 | – | 6 | 0.2 | – | 1.5 | 0.02 B |
Select grades to compare them side by side, or save them to a shortlist.
* indicates maximum. Chemical compositions are provided as typical or nominal reference values for material identification only. They do not constitute a purchasing or supply specification. Applicable standards, chemistry ranges and customer requirements must be confirmed before any transaction.
Scroll the table sideways to see all elements, or switch to cards above.
Have high-nickel alloys to place?
The grade or analysis, the form and the quantity are enough to start. We will assess the available route.
For buying, selling and other material enquiries, contact us at info@ims-metals.com.